Compared with full-frame and semi-rimless eyeglasses, rimless eyewear is quite different in design. In general, a pair of rimless eyeglasses is consisted of two lenses, two temples and a bridge. No more parts are needed. The eyeglass lenses are connected through the temples and the bridge. This structure differs considerably from full-frame and semi-rimless designs. From these two designs, an eyeglass frame can be seen more or less. The name of full-frame eyeglasses suggests that there is a full frame goes around the lenses, holding them stably.
Even semi-rimless eyeglasses have a half frame holding half of the lenses. Some eyeglass users may think that rimless eyewear is unsafe. Their concern lies in that the lenses attach directly to the temples and the bridge using screws. Both sides of a lens have a hole, which is used to place a screw. In this case, a total amount of four holes are made on the two lenses. In fact, most reputable eyeglass manufacturers will ensure the safety of their rimless eyeglasses. Rimless eyeglasses are mostly used to compromise a visual problem. Their special design never offsets any visual correction.
With the assurance of safety, more and more people would appreciate the benefits of rimless eyeglasses. Yet the most commonly mentioned benefit is the stylish design. Without any lens frame, rimless glasses will cover a minimal part of the wearer’s face. In opposite, full-frame or semi-rimless spectacles will reduce one’s natural attractiveness inevitably. This is really an exclusive advantage. Some people even call this an “invisible” design. This design is quite simple and fashionable. And the reason why more and more eyeglass users choose to wear rimless glasses when they need vision correction can be found. From another viewing point, those visual-correction-needed individuals can retain their natural look as much as possible by wearing rimless spectacles.
In addition to attractiveness, rimless eyewear has another significant advantage. It is quite obvious that rimless eyeglasses use less frame material because they have no visible frames. Only the temples and the bridge consume a small amount of frame material. Compared with those full-frame and semi-rimless glasses, the savings of frame material are considerable. In some cases, material saving means the decrease in cost at the side of a manufacturer. But this is not the end. Eyeglass users can benefit lightness from rimless eyewear. This enjoyment is really significant that the burden on the nose can be reduced. Remember that rimless eyewear also represents the feature of lightweight.
